Anaheim Corporate
A 30,000+ square foot industrial building in Southern California. The low-slope roof was torn off and replaced with an SBS modified bitumen system.

What the owner needed.
The brief
Replace an aging roof on a high-use industrial building with a durable system that handles many penetrations.
The challenge
More than 100 mechanical penetrations, plus skylights and HVAC units, with the facility operating underneath.

Modified bitumen.
Multi-ply SBS and APP asphalt membranes with built-in redundancy.
What we did on this roof.
A full tear-off on an operating industrial building.
Site noteOn a roof this busy, the membrane is the easy part. The details are where it is won or lost.
Scope & budget
- Full tear-off
The existing low-slope roof was torn off across the 30,000+ square foot building. - Fully adhered SBS system
A fully adhered, multi-ply SBS modified bitumen system was installed. - Reflective cap sheet
The system was finished with a reflective cap sheet.
Scheduling & phasing
Quality & warranty
- Flashing at every penetration
Each of the 100+ penetrations and skylights received new flashing. - Curb reinforcement
Curbs were reinforced at the HVAC units and skylights, which is where most leaks on busy industrial roofs start.
A uniform, watertight roof across the whole building, with better drainage and a longer service life.
Scope summary
- Full tear-off of the low-slope roof
- SBS modified bitumen system
- Detailing at curbs and penetrations
On the site.
Want the full details on Anaheim Corporate?
Scope, duration, phasing and a reference contact are available on request for this project and anything else in the portfolio.
(866) 699-3360One number, every market










